
Exponor · Leça da Palmeira (Matosinhos)
LED wall rental in Porto for trade fairs
LED wall rental for your stand at Exponor, Porto: EMAF, Concreta, FIMAP and Expoalimenta. Transport, installation, a technician on site and dismantling.
Since 2010
at trade fairs across Europe
All inclusive
transport, installation, dismantling
Technician on site
from opening to closing
24 working hours
to get your proposal
01 · Installations
How they look at the fair
Every photo and video is a real stand, installed by us. The caption tells you the fair where it was filmed.
Swipe to see more →All videos
02 · What is included
You bring the video. We take care of the rest.
01
We advise you
Format, size, resolution and content. If your stand is already designed, we fit the screen to the project; if not, we suggest the one that reads best from the aisle.
02
We deliver it
Transport to Exponor and delivery during the build-up times the organiser allocates. You don’t deal with vans or loading-bay passes.
03
We install it
Installation on the stand, connection and a test with your content. The screen is on and working before the doors open.
04
We stay
One of our technicians is at the venue for the whole fair. If something goes wrong, you don't wait for someone to come from outside.
05
We dismantle
At closing we take the screen down and away, so your stand builder can start the breakdown.
03 · Formats
Your stand decides the size
We work with 50 × 50 cm modules: the screen grows in 50 cm steps up to the size you need. These are the formats we install most often.
3.5 × 2 m
Most requested
The balance between presence and space: visible from the aisle, and it can play the 16:9 video you already have; we tell you if it needs any adjustment.
04 · Trade fairs in Porto
Porto trade fairs
Exhibiting at Exponor? It is Portugal's largest trade fair venue, in Leça da Palmeira, ten minutes from Porto airport, and it hosts professional fairs such as EMAF, Concreta, FIMAP and Expoalimenta. We bring the LED wall to the venue, install it on your stand, keep a technician on site for the whole fair and take it away at the close.
EMAF
Machinery, equipment and services for industry · every two years (odd years), late May or June
Portugal's largest fair for machinery, equipment and services for industry: makers of machinery, automation and robotics, raw materials and industrial software meet managers, engineers and technicians; next edition 1 to 4 June 2027.
Concreta
Architecture, construction, engineering and design · every two years (even years), November
Portugal's national meeting point for architecture, construction, engineering and design, with conferences, awards and debate spaces for professionals; the 2026 edition runs from 18 to 21 November.
Eletrica
Energy, mobility, electronics and electrical equipment · every two years (even years), November, alongside Concreta
The main Portuguese fair for energy, mobility, electronics and electrical equipment, for those who decide on, install, operate and design solutions for industry, buildings and energy infrastructure.
FIMAP
Woodworking, forestry and biomass machinery and technology · October, in even years (2024 and 2026 editions)
The professional fair for the wood sector: industrial machinery, biomass, forestry technology, automation, wood processing and specialist services, with equipment, tools and software.
Expoalimenta and Expocarne
Food and meat industry: machinery, equipment and products · every two years (even years), October or November
The trade fair for companies that supply the food sector, from processing and packing machinery to food and drink, held with Expocarne, the meat industry fair; accredited professionals only.
Empack and Logistics & Automation Porto
Packaging, logistics, automation and supply chain · every year, April (next edition 28–29 April 2027)
Portugal's meeting point for professionals looking for new ideas in packaging, logistics, automation and supply chain: two days with companies, specialists and decision-makers from the whole value chain; next edition 28 and 29 April 2027.
InProjecta
Furniture, hospitality and interior design · every year, February
A professional event of controlled size and demanding selection for furniture, hospitality and interior design brands, in front of architects, interior designers, decorators and hotel specialists.
05 · Why Euroledwall
Trade-fair specialists.
Trade fairs are what we do: we know the build-up windows, the venues and what happens the night before opening.
All inclusive.
The quote covers transport, installation, a technician for the whole fair and dismantling. Electrical power is ordered from the venue.
A technician on site.
For the whole fair, at the venue, not at the other end of a phone line.
Made to measure.
From a standard format to a ten-metre band: we design the screen around your stand, not the other way round.
06
Exponor: six halls and a calendar that runs in cycles
Exponor, the Feira Internacional do Porto, is in Leça da Palmeira, in the municipality of Matosinhos, about fifteen minutes from central Porto. It covers 180,000 m² in total, with 45,000 m² under cover, spread across six halls ranging from about 2,000 m² to almost 8,000 m², plus galleries and foyers that are also used for exhibitions. By road you reach it on the A1 and A28, which have their own “Exponor” exit; Francisco Sá Carneiro airport is ten minutes away. Your team can also use STCP buses 601 and 507, or the metro to Casa da Música or Senhor de Matosinhos with a bus connection.
The second thing worth knowing is that many of Exponor's professional fairs are not annual. Concreta, the architecture and construction fair, and Eletrica, the energy and electrical equipment fair, run together every two years in November: the 2026 edition is from 18 to 21 November, and the cycle continues in even years. Expoalimenta and FIMAP have also been held in the autumn of even years. EMAF, the big machinery fair, comes round in odd years, as in 2025 and 2027, while Empack, the packaging and logistics show, comes back every April, and InProjecta, the furniture and interiors fair, returns every February.
So before we talk about screens, we look at the year and the hall with you. With halls of such different sizes and fairs that sometimes share dates, those two details decide which door the equipment uses and which unloading slot the organiser gives you.
07
EMAF and FIMAP: machines, shown big and running
EMAF presents itself as Portugal's largest fair for machinery, equipment and services for industry. It runs in odd years: the last edition took place from 27 to 30 May 2025 and the next one is from 1 to 4 June 2027. Exhibitors are makers of industrial machinery and equipment, automation and robotics, raw materials and industrial software, and visitors are managers, engineers and technicians looking for concrete solutions for their plant.
At a fair like this, visitors want to see the process. If your machine is on the stand but can't run, or if you sell a whole line that won't fit in a hall, a 4 × 2.5 m or 5 × 3 m screen at the back of the stand shows the complete cycle at real scale. A band along the top of the structure carries your message above the machines and can be read from the next aisle; we build it from 50 × 50 cm modules, sized in 50 cm steps to suit your design.
FIMAP is the professional fair for the wood sector: industrial machinery, biomass, forestry technology, automation and wood processing. Its last two editions, in October 2024 and October 2026, were held at Exponor. The machines are big and the hall is noisy, so video that doesn't depend on sound works best: close-ups of cutting, machining or finishing that make sense in a few seconds. And for forestry and biomass exhibitors, the screen shows what can't be brought into the hall: the forestry machine at work on real terrain.
08
Concreta, Eletrica and InProjecta: design, construction and interiors
Concreta describes itself as Portugal's national meeting point for architecture, construction, engineering and design, with access reserved for professionals: the people who design, build and decide. It runs alongside Eletrica, the Portuguese fair for energy, mobility, electronics and electrical equipment, which brings together those who decide on, install, operate and design solutions for industry, buildings and energy infrastructure.
On these stands the product is a material, a system or a project, and the screen shows it in use: the finished façade, the system installed on site, the installation up and running. For a medium-sized stand a 2.5 × 1.5 m or 3.5 × 2 m screen built into the back wall is enough; if your stand opens onto two aisles, a totem on the corner draws visitors in. At Eletrica, where chargers, switchboards and energy management systems are on show, a screen at eye level next to the demo explains what the device does inside.
InProjecta is the professional event for furniture, hospitality and interior design, deliberately kept to a controlled size with a demanding selection of brands, in front of architects, interior designers, decorators and hotel specialists. It is held every February; the next edition runs from 18 to 20 February 2027. Here the screen has to be part of the stand's architecture: a band above the counter or a framed screen in the wall showing the collection already installed in a hotel room or living room, without stealing attention from the real piece.
09
Food, packaging and logistics: Expoalimenta, Expocarne and Empack
Expoalimenta is the trade fair for every company that supplies the food sector, from machines, equipment and accessories for preparing, packing and processing, to food and drink itself. It runs alongside Expocarne, which presents itself as Portugal's only fair for the meat industry, covering every stage of meat processing plus services such as refrigeration, software and packaging. Their last two editions at Exponor were in October 2024 and from 4 to 6 November 2026, and entry is reserved for accredited professionals.
Empack and Logistics & Automation Porto bring packaging, logistics, automation and supply chain to Exponor for two days, with round tables and tours of the most innovative solutions. It runs every year in April; the next edition is on 28 and 29 April 2027. These are short, intense fairs: the content on your screen has to be ready and tested from the very first minute, because there is no third day to fix it.
In both cases the same approach works: a short video of the line running, on a loop, on a 3.5 × 2 m or 4 × 2.5 m screen visible above the machine on display. If your stand has tastings or live demonstrations, a second compact screen next to the counter presents the range while your sales team talks to visitors.
10
How we work at Exponor
At Exponor we take care of the whole LED side of your stand: we bring the screen by road to Leça da Palmeira, install it, keep a technician with it for the whole fair and dismantle it at the close. The first thing we confirm is your hall and the goods access assigned to you, and we coordinate with your stand builder so the screen goes in when the structure is ready for it.
Some of these fairs are organised by Exponor itself and others by external organisers, so before installation we check the regulations, the unloading slot, the electrical power and any rigging with whoever is responsible in each case. We also test your video at the screen's real resolution, so it looks on the stand the way you imagined it.
We work for exhibitors and as the technical supplier for stand-building companies: we give you dimensions, weight and power consumption for your design, and the client keeps dealing with you. Euroledwall has installed LED walls at trade fairs across Europe since 2010. Call us on +39 049 838 0040 or write to info@euroledwall.eu.
11 · The venue
Exponor
Leça da Palmeira (Matosinhos), about 15 minutes from Porto and 10 from the airport; A1 + A28, “Exponor” exit
Portugal's largest venue for trade fairs and events, by its own description: 180,000 m² in total and 45,000 m² under cover, spread over six halls, galleries and foyers, with a 945-seat auditorium and around 2,250 parking spaces. It lies in Leça da Palmeira, in the municipality of Matosinhos, about 15 minutes from Porto and 10 from Francisco Sá Carneiro airport.
12 · Logistics
01
A28, “Exponor” exit
The venue has its own exit on the A28 and is ten minutes from the airport. We plan road transport around the unloading slot assigned by your fair's organiser and confirm it with them before we travel.
02
Installation on each fair's build-up days
We install within the days set by each fair, coordinated with your stand builder. As every show has its own organiser and timetable, we confirm them fair by fair and hall by hall.
03
Power and rigging
Stand electricity and any rigging are ordered from the organiser or the venue. We give you the screen's power consumption and weight so both requests go in on time.
04
A technician in Leça da Palmeira for the whole fair
One of our technicians stays at the venue from opening to closing, including at four-day fairs such as EMAF or Concreta. At the end we dismantle and remove everything.
Do you design and build stands?
We are the LED technical supplier for stand builders. You keep the relationship with your client; we take care of everything LED, working to your schedule.
Talk to us directly
info@euroledwall.eu- Italian office+39 049 838 0040
- German office+49 30 2178 4011
- French office+33 1 87 65 17 15
- Spanish office+34 911 239 796
13 · FAQ
Questions about Porto
14 · Quote
Exhibiting in Porto?
Tell us which fair you are exhibiting at and what you have in mind. We reply with a proposal within 24 working hours.
Prefer to call? The office in your language
- Italian office+39 049 838 0040
- German office+49 30 2178 4011
- French office+33 1 87 65 17 15
- Spanish office+34 911 239 796



