Skip to content
Euroledwall
Four-sided LED totem in an exhibition hall

Vertical formats · Totem

LED totem rental for trade fairs

An LED totem, sometimes called an LED poster, is a vertical screen that takes up little floor space and can be seen from a distance. On a stand it marks the entrance, signals a corner or sits beside a product without hiding it. We rent it in tall, narrow formats, single-sided or four-sided, with transport, installation, a technician on site for the whole fair and dismantling at the close.

Euroledwall installation at a trade fair

Three vertical LED screens on the front of a white stand

Euroledwall installation at a trade fair

Where a totem pays off on a stand

The totem is the screen for tight spots. At the stand entrance it is both eye-catcher and sign; on the corner of a stand open on two or three sides, a four-sided totem can be seen from every aisle; next to a machine or display, it uses portrait video to show what the product alone cannot. In national pavilions and on large stands it also helps visitors find their way: areas, presentation times, where each company is.

It can fit on a small stand, as long as the base and support structure leave enough room for the counter and for visitors to move through. And because it is tall, it rises above the crowd when the aisle is full, which is exactly when you most need to be found.

Vertical LED columns on a light-coloured stand

Euroledwall installation at a trade fair

Vertical formats we install

We work with 50 × 50 cm modules, so a totem grows in 50 cm steps. Our technical data sheets include vertical formats such as 0.5 × 2 m, 0.5 × 4 m, 1 × 1.5 m, 1 × 2.5 m, 1 × 3.5 m and 1.5 × 2.5 m, and for each one we give the exact video resolution: a 0.5 × 2 m totem, for example, runs at 192 × 768 pixels.

If you want more than a single column, we also install four-sided totems, where each side can show different content or the same video in sync, and rows of totems that give rhythm to a stand's frontage.

To choose the size we consider two things: the stand height, because the totem shouldn't exceed what the fair's regulations allow in your area, and the distance people will see you from. A 2 m totem works at the entrance to a small stand; to be seen above the crowd in a busy aisle, it's worth going to 2.5 m or more.

LED totem in the Korea pavilion at MWC

MWC Barcelona · KICTA

What it needs to stand up

A totem doesn't stand on its own. Our data sheets call for a support base able to carry 35 kg per square metre of screen, plus side structures to anchor it to; for a 0.5 × 2 m totem that is about 35 kg. On a modular stand the walls don't usually take that weight, so we provide a dedicated structure, independent of the stand and finished in black.

Maximum power consumption is 800 W/m²: 800 W for a 0.5 × 2 m totem. The power requirement is confirmed in the project data sheet. The exhibitor orders from the venue the connections listed there, industrial 16 A single-phase or 32 A three-phase sockets, and we recommend a dedicated distribution board for the screens. All of this goes in the data sheet we send to your stand builder.

Wherever possible we also ask for access behind the totem and for the power outlet to be at the back, so no cables are visible from the aisle and the technician can work on it without dismantling anything.

Cosmoprof, Bologna · Dermosfera

Vertical content: how to prepare it

The most common mistake is putting a horizontal video on a totem with black bars above and below. A totem calls for vertical content: the product standing upright, a full-length shot of a person, large stacked text. The good news is that many brands already have vertical videos for social media, and they usually adapt with little work.

Send it to us as MP4 a few days before installation; we check it at the resolution of the chosen format and load it in the order you tell us. If you want to use photos, we turn them into a video so they rotate on their own.

A practical tip: visitors walk past a totem in a few seconds. Short loops of twenty or thirty seconds, with the brand name always visible, work better than a long video that only makes sense to someone who watches it all the way through.

If you are a stand builder

For a stand builder a totem is easy to integrate if it's planned from the start: the base, fixings and power connections specified in the data sheet for the chosen format. We send you dimensions, weight and consumption for each format and arrive once the structure is ready. If the stand has several totems, we plan them as a set so they share power and content. You keep the relationship with the exhibitor; for any technical question, we're on +39 049 838 0040 or info@euroledwall.eu.

01 · Technical data

From our technical data sheets

Vertical formats with technical data sheet
0.5 × 2 m · 0.5 × 4 m · 1 × 1.5 m · 1 × 2.5 m · 1 × 3.5 m · 1.5 × 2.5 m, among others
Resolution of a 0.5 × 2 m totem
192 × 768 pixels
Maximum power consumption
800 W/m² (800 W for a 0.5 × 2 m totem)
Support base load
35 kg per m² of screen (35 kg for a 0.5 × 2 m totem)
Power connection
Industrial 16 A single-phase (220 V) or 32 A three-phase (380 V); a dedicated distribution board is recommended

Values from Euroledwall’s technical data sheets. The exact figures depend on the format and model we install at your fair; we send them with the quote.

02 · At the fair

Ideas for your stand

How it could work at some European trade fairs

MWC Barcelona

Barcelona

Totems at the entrance to national pavilions, guiding visitors from one company to the next.

Trade fairs in Barcelona →

Fruit Logistica

Berlin

A four-sided totem on the stand corner, visible from two aisles at once.

Trade fairs in Berlin →

Sigep World

Rimini

A totem by the counter showing the day's creations in vertical video.

Trade fairs in Rimini →

ITB Berlin

Berlin

A row of totems, each showing a different destination, inside a regional pavilion.

Trade fairs in Berlin →

Conxemar

Vigo

A totem at the entrance showing where the product comes from while the sales team talks with visitors at the table.

Trade fairs in Vigo →

03 · FAQ

Frequently asked questions

They are vertical formats that grow in 50 cm steps, such as 0.5 × 2 m, 1 × 2.5 m or 1.5 × 2.5 m. We suggest the size based on the stand height and the distance people will see you from.

As it is a small format, the price is driven mainly by the size, whether it is single- or four-sided, and the number of fair days. Send us the floor plan and we'll tell you which one fits and where.

Yes, but usually with its own structure, because modular walls rarely take the weight. We supply it and it stands independently of the stand.

A vertical MP4 video at the resolution of the chosen format. If you already have vertical content for social media, it usually works with a few tweaks.

Yes. A row of totems or a four-sided totem can play the same video at the same time or different, complementary content. We have it programmed before the fair opens.

04 · Quote

Shall we look at it on your floor plan?

Tell us which fair you are exhibiting at and where you want the screen: we tell you whether it fits and prepare the quote.

Fields marked * are required.

Prefer to call? The office in your language

info@euroledwall.eu
Quote