Skip to content
Euroledwall
Large-format LED screen at the back of a wooden stand with a counter

Large format · Trade fairs and events

Giant LED screen rental for trade fairs, congresses and events

A giant screen is one you can see from the hall entrance or from the back row of a conference room. We rent it for large stands, congresses and corporate events held at exhibition centres, with transport, installation, a technician for the whole event and dismantling. Our technical data sheets include formats such as 8 × 5 m and 10 × 3.5 m.

Euroledwall installation at a trade fair

Large LED screen on an open stand with a glossy floor

Euroledwall installation at a trade fair

What “giant” means inside an exhibition hall

On a stand, a 5 × 3 m screen is already large: it dominates a wall and reads from the aisle opposite. Beyond that come the formats that change the scale of the space, such as 6 × 3.5 m, 7 × 5 m, 8 × 5 m or a 10 × 3.5 m band, all with their own data sheet. Because it is built from 50 × 50 cm modules, the screen can be sized in 50 cm steps to suit the wall or the stage.

A screen this size is seen from far away, but it is also viewed up close, especially on a stand. That's why we work with pixel pitches of 2.6, 2.8 and 2.9 mm, which keep the image sharp even a few metres away, and we give you the exact resolution: the video data sheet for the 10 × 3.5 m format specifies 3840 × 1344 pixels, and we confirm the resolution of the model installed.

Large LED screen above a stand bar with tables full of visitors

Euroledwall installation at a trade fair

Large stands: the screen as the frontage

At the big industrial fairs, the stand competes with machines several metres tall. There, a giant screen acts as the frontage: it can be mounted high up if the structure and the permitted height allow, and it carries the brand and the product video to the far end of the hall. It's the format that stands of several hundred square metres call for, where a medium-sized screen gets lost.

It also works at tourism or consumer fairs with large regional and national pavilions, as a backdrop for destination or product presentations to dozens of people at a time.

On these stands the giant screen is often part of a small stage area: a platform, some chairs and a presenter speaking with the image behind. So we set its height to be visible above the heads of a standing audience, and position it so the stand's own structure doesn't block it.

EuroBLECH, Hannover · Samec

Congresses and corporate events at exhibition centres

Besides the exhibition halls, many venues have dedicated congress and event spaces, such as Allianz MiCo in Milan, IFEMA Palacio Municipal in Madrid or FIBES in Seville. In those rooms, the giant screen is the stage backdrop for talks, product launches, sales conventions or award ceremonies.

The logic is the same as on a stand, at a different scale: transport, installation within the venue's set hours, tests with the event's presentations and a technician present from start to finish. If the congress also has an exhibition area, we can handle the screens on the stands too.

Set-up times in a conference room are usually shorter than in an exhibition hall, because the room is in use right before or right after. So we agree with the venue and the event agency on the arrival time, access for equipment and when to run tests with the speakers.

ISE Barcelona · Ekinex

What a screen this size requires

The technical side needs early planning. Maximum consumption is 800 W/m², so a 5 × 3 m screen reaches 12 kW and a 10 × 3.5 m screen 28 kW. For a 5 × 3 m screen, the data sheet specifies Schuko sockets of up to 1.5 kW each on separate lines, or 32 A three-phase CEE connections, which the exhibitor orders from the venue; for other formats we send you the relevant data sheet. The support base must carry 35 kg per square metre, which is about 525 kg for a 5 × 3 m screen.

We put all of this in the data sheet we send to the stand builder or the event organiser, together with the dimensions of the opening and the request for access behind the screen. Whether it can be hung depends on what the venue authorises, and we confirm this before proposing it.

Content at the scale of the screen

A giant screen magnifies everything, flaws included. Send us your videos as MP4 a few days ahead; we check them at the actual resolution and load them in the playback order you give us, and still images are turned into video. If the event has speakers, we agree beforehand how content is switched during the session. To plan your screen: +39 049 838 0040 or info@euroledwall.eu.

01 · Technical data

From our technical data sheets

Large formats with technical data sheet
5 × 3 m · 6 × 3.5 m · 7 × 5 m · 8 × 5 m · 9 × 2.5 m · 10 × 3.5 m
Resolution of a 10 × 3.5 m screen
3840 × 1344 pixels
Pixel pitch
2.6 · 2.8 · 2.9 mm, depending on the model
Maximum power consumption
800 W/m² (12 kW for a 5 × 3 m screen)
Support base load
35 kg per m² (525 kg for a 5 × 3 m screen)
Power connection (5 × 3 m format)
Schuko sockets of up to 1.5 kW on separate lines, or CEE 32 A three-phase (380 V)
Video format
MP4

Values from Euroledwall’s technical data sheets. The exact figures depend on the format and model we install at your fair; we send them with the quote.

02 · At the fair

Ideas for your stand

How it could work at some European trade fairs

HANNOVER MESSE

Hannover

A large-format screen as the frontage of an automation stand, visible from the hall entrance.

Trade fairs in Hannover →

bauma

Munich

Large format on the stand frontage, so the brand can be seen from afar among the machinery.

Trade fairs in Munich →

EIMA International

Bologna

A giant screen behind the tractors showing fieldwork at life size.

Trade fairs in Bologna →

FITUR

Madrid

A stage backdrop for destination presentations inside a regional pavilion.

Trade fairs in Madrid →

Smart City Expo World Congress

Barcelona

A screen for talks in the space of a city or a technology company.

Trade fairs in Barcelona →

03 · FAQ

Frequently asked questions

Our data sheets go up to formats such as 8 × 5 m or 10 × 3.5 m, and with 50 × 50 cm modules we size the screen in 50 cm steps to suit the space. We decide based on the floor plan and the distance people will see it from.

Yes, at exhibition centres and in their congress and event spaces. We install the screen as a stage backdrop, and one of our technicians is on site for the whole event.

It depends mainly on the square metres, the supporting structure and the days of use, and for an event also on the number of sessions. For large formats we prepare a quote based on the floor plan of the room or stand.

Allow a maximum of 800 W/m²: about 12 kW for a 5 × 3 m screen. We give you the exact figure for your format so you can order it from the venue.

We work with pixel pitches from 2.6 to 2.9 mm, which keep the image sharp a few metres away. That's why it works both on a stand and in a conference room.

It depends on the structure of the stand or room and on what the venue authorises. We confirm before proposing it and, if it isn't possible, we plan a floor-standing structure.

04 · Quote

Shall we look at it on your floor plan?

Tell us which fair you are exhibiting at and where you want the screen: we tell you whether it fits and prepare the quote.

Fields marked * are required.

Prefer to call? The office in your language

info@euroledwall.eu
Quote